MÁY BẾ TỰ ĐỘNG MK Easymatrix 106CS

 5/5

Thông tin sản phẩm

MÁY BẾ TỰ ĐỘNG MK Easymatrix 106CS

Die Cutting Machine with Stripping Easymatrix 106CS

(The picture is only for reference, please make the object as the standard.)

Technical specifications of equipment

Technical specifications

Maximum sheet size	1,060 mm x 750 mm
Minimum sheet size	400 mm x 360 mm
Maximum die cutting size	1,045 mm x 745 mm
Gripper margin	9 – 17 mm
Internal size of frame	1,120 mm x 779 mm
Applicable material	Cardboard: 0.1-2.0mm (90-2000 g/m²) Corrugated: ≦4.0mm (flatness ＜20mm/m²)
Die cutting precision	± 0.15 mm
Maximum cutting pressure	2.6 MN
Maximum work speed	7,700 s / h
Maximum feeding pile height	1,150 mm (including pallet)
Maximum delivery pile height	1,000 mm (including pallet)
Overall dimensions of machine	6,177 mm (L) x 4,100 mm (W, including pallet) x 2,100 mm (H)
Weight of machine	Approx. 17,000 kg
Main motor power	11 KW
Rated power	14 KW
Full-load power	16.9 KW
Air source requirements	Pressure 0.6 – 0.7 Mpa, flow rate > 0.37 m³/min

Standard specification

Non-stop Feeder

Stream type paper feeder, maximum speed is more than 128 sheets per minute.
Complete non-stop high-speed paper feeding section.
Powerful sheet suction feeder with 4x lifting and 4x forwarding suction cups. Height and angle of suction cups are easily adjustable to accommodate paper condition.
Feeder lifting adjustment.
Feeder back and forth movement adjustment.
Split nuts.
Adjustable suction tube.
3 feeder anti-collision devices.
Air volume adjustment nozzle for feeder.
Adjustable brush wheel device, turnover sheet feeding frame.
Pull-and-push side lay.
Paper separating with side blowing.
Electromechanical double sheet detector.
Paper transferring belt with high quality.
Sheet slow down before arrival at front lays.
Paper fine adjustment system.
PLC and encoder for paper arrival time detection.
Side lay, front lay paper photoelectric detection.
The single point electromagnetic positioning clutch, which separately drives the main machine and feeding unit, it will be easier to operate.
Paper feeding pile motorized left and right adjustment mechanism.
Both side lay and front lay are equipped with photoelectric detection switch.
Manual non-stop feeding system.
The suction head and air sliding valve are made from super hard alloy.
Angle adjustable function for front lay.
Paper feeding and die cutting can be separated switch control.
Brush roller components (each 4 sets , soft and hard).
Paper pressing wheel combinations (10 sets).
Clicps for thick paper 10 pcs.
Clicps for thin paper 30 pcs.
Non-stop feeding pallet 2 pcs.
Paper inserting rod 1 set.
Paper guide rod 1 set.

Die Cutting Unit

Motorized pressure regulating mechanism.
40Cr crankshaft.
Complete set of high quality worm gear and worm.
Nodular cast iron base, left and right cover and upper and lower press.
Rotary device for die cutting base plate and cutting die.
Torques limit overload protection.
Main drive chain.
High quality intermittent divider.
High quality timing belt.
Main chain automatic intermittent lubrication system.
Main drive pneumatic clutch brake device.
Becker vacuum pump from Germany.
Complete set of anodized gripper bar with fine adjustable system, 7 pcs in total.
1 spare gripper bar.
Lock-bottom die-cutting chase 1 set.
Pneumatic chase locking device for upper and low plate pneumatic locking.
The die-cutting lower base plate combination.
Equipped with central lubrication system, can lubricate the CAM.
Automatic lubricating oil cooling and lubrication system in main transmission box.
Fine-tuning mechanism for gripper bar aligning (patented product).
The lower press blowing energyfunction of the main engine.
Paper detection angle can be adjusted with paper.

Stripping Unit

Central positioning system.
Upper stripping drive mechanism.
Upper stripping frame pneumatic lifting device.
Upper stripping frame with central positioning and quick lock device.
Middle stripping board drive mechanism.
Middle stripping board supporting device.
Lower stripping drive mechanism.
Lower stripping frame locking device.
Waste box for waste edge collection of lower stripping frame
Upper and lower illuminator for stripping unit.
Aluminum stripping frame 4 pcs.
100 sets of stripping pin hook.
24 sets of beam hook.
9 sets of adjustable beam.
30 sets of extendable stripping pin.
Stripping pin (200pcs in total).
90 pieces of stripping pin connecting block.

Delivery Unit

Non-stop delivery.
Bidirectional mechanical aligning device.
Pneumatic samples taking device.
Air blowing tube for sheets.
Brake brush for sheets discharge from gripper bar.
Manual non-stop delivery can be operated independently when starting up.
Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up.
Paper safety protection, delivery upper limit, lower limit, early warning.
Sensor for automatic delivery pile dropping detection.
Sensor for mess detection.
Sensor for back paper detection.
Safety light curtain for delivery.
Non-stop delivery pallets 2 pcs.

Electrical Unit

Mitsubishi PLC
10″ touch color man-machine interface operation equipment, with English and Chinese operation.
SIMENS frequency conversion controller.
Main electrical components, motors are imported parts.
Electrical control according to CE specification design, add safety module control. Safety loop detection, safety door and other double circuit multi-contact redundancy design.