Máy bế tự động MK Promatrix 106cs

 5/5

Thông tin sản phẩm

MÁY BẾ TỰ ĐỘNG MK Promatrix 106CS

Die-Cutting Machine with Stripping Promatrix 106CS

(The picture is only for reference, please make the object as the standard.)

Technical specifications

Maximum sheet size:	: 1060mm x 760mm
Minimum sheet size	: 350mm × 300mm
Maximum die cutting size	: 1060mm x 745mm
Gripper margin	: 9～17mm(Standard: 13mm)
Inner chase size	: 1120mm x 779mm
Convertible stock	: Cardboard: 0.1-2.0mm (80-2000 gsm) Corrugated: ≦4.0mm
Max. feeder pile height	1,500mm incl. pallet of 120 mm
Max. delivery pile height	1,400mm incl. pallet of 120 mm
Maximum speed	8000 sheets per hour
Die cutting accuracy	≦±0.075mm
Preset max. die cutting pressure	2.6 MN
Wattage of main drive motor	15.0 KW
Power supply	3 ~ 400 V / 50/60 Hz
Overall dimensions (L x W x H)	6400mm x 4610mm (included platform) x 2510 mm
Weight	16 metric tons

Standard specification

Non-stop feeder

Stream-wise feeding system for up to 8,000 sheets/hour
Paper speed slow-down at its arrival at front guides
Adjustable suckers
Height and angle of suction cups are easily adjustable to accommodate paper condition
Suction barrels and dividers are with ultra hard coat finish
3 anti-crash devices for the protection of suction head due to over-ascending of feeder pile
Vacuum sheet feeding table
Spring supported lifting device for the frame on the sheet feeding table
Imported sheet feeding belts
4 lifting and 4 forwarding suction cups
The gripper bar open device when the sheets are not arriving at the front lay.
Main and assistant sheet pile, make the machine no-stop
Lateral blowing system enhancing paper separation
Precision ultrasonic wave double sheet detector
Easy changeover of pull and push side guides simply by turning a bolt without the need of removing and replacing complete side guide
Side and front guides with photocells
Single position engagement electromagnetic clutch insures the first sheet after every re-start of machine is always fed to front lays for easy, time-saving and material-saving make-ready
Photo-electric detector with automatic stop system on feeding table in case of paper jam
Separate drive controls of feeding unit and the main machine for easy make-ready
I set of steel paper support rods for non-stop feeding
4 sets each of brush roller assemble for cardboard and paper on feed table
3 kinds of press wheel each 2 set
Sheet press belts and brush wheel combination device 2 set
10 sets of Nylon roller assembly for paper hold-down on feed table
2 sets of press-down steel ball assembly on feed table
2 paper pile skids for non-stop feeding
Steel rack for pre-piling of paper stock
Becker vacuum pump

Platen Press

Micro adjustment of cutting force by worm gear driven by servo motor
Crank shaft made of 40Cr steel
Machine frames, upper and lower platens made of QT60 ductile iron with resin coated sand with Meehanite Die Cast Iron Technology, with weathering and twice heat treatments
Accurate positioning of Cutting chase controlled by precision photocell sensors
Cutting chase turn-over device
PLC and electronic cam for timing control
Air cooling system for gear box lubrication oil
Overload protection device with torque limiter for the highest safety of operator and equipment
Gripper bars made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish
Ultra low stretch and friction gripper chain
Imported intermittent mechanism and timing belt
Patented device for quick compensation of gripper chain elongation
Brake system of main drive motor with pneumatic clutch
5mm support plate for cutting plates made of ultra durable engineering plastic Position of support plate in machine and transversal directions is micro adjustable.
0mm+1.2mm Cutting plates
Pneumatic lock-up and release of cutting chase
Electronic detector detecting sheet breakage of all sheet size convertible by the machine
One spare gripper bar
Two set of universal cutting chase with quick-lock device and with the central line registration system

Triple Action Stripping Device

Driving system for upper stripping frame, stripping board and lower stripping frame
Upper stripping frame with pneumatic lifting device
Upper stripping frame with pneumatic quick-lock device
Stripping board with quick-lock device
Lower stripping board with central line registration system
Supporting frame for the middle stripping board with the central line registration system
Position of stripping frames and stripping board is micro adjustable with digital display
Aluminum alloy upper stripping frame x 2 sets
Aluminum alloy lower stripping frame x 2 sets
Telescopic stripping bar x 9 sets
Clamp for holder of upper stripping pin x 100 sets
Clamp for stripping bar x 24 sets
Lower stripping pin x 30 sets
Upper stripping pin x 50 pcs separately
Pin holder x 90 pcs