ETERNA Die cutting machine
Die cutting machine Model: 1050 Class E
主要技术特性specifications
3.1 适用加工材料APPLICABLE MATERIALS
卡纸Cardboard |
80~2000g/m²(视产品和纸张因素而定) (subject to quality of the paper) |
瓦楞纸板 Corrugated Board |
厚度≦4mm(视产品和纸张因素而定) thickness ≤ 4mm (subject to quality of the corrugated board) |
3.2 基本性能规格BASIC PERFORMANCE Die cutting machine
最大纸张尺寸 Max. Sheet Size |
1060 mm × 750 mm |
最小纸张尺寸
Min. Sheet Size |
400 mm × 360 mm |
最高机械速度
Max. Mechanical Speed |
7500转/小时 (视模切产品的排列、纸张因素及操作因素而定) 7500 cycles/hour (Subject to die layout, paper quality and operation skills, etc.) |
最大压切力 Max. Cutting Pressure |
300吨 300 tons |
3.3 整机外形尺寸和重量DIMENSIONS & WEIGHT Die cutting machine
长度Length |
6110 mm(包含预堆纸长度) (including preloading system) |
宽度Width | 4280 mm(含标准踏脚台宽度)
(including standard catawalk) |
高度Height | 2035 mm(标准高机器)(without elevation) |
净重Net Weight | 14.5 Tons |
3.4 模切DIE-CUTTING
最大模切范围
Max. Cutting Size |
1040 mm × 720 mm (版框的快速夹拆下时可切到730 mm) (Maximum cutting size can be reached at 1040 mm x 730 mm when the quick locking system is dismantled from the die chase) |
版框内径尺寸 Inner Chase Size |
1080 mm × 745 mm |
模切钢板尺寸 Cutting Plate Size |
1080 mm × 736 mm |
最小废边宽 Min. Gripper Margin |
8 mm (视模切产品的排列、纸张因素及操作因素而定) (subject to working environment, sheet quality and operation skills, etc.) |
3.5 电力ELECTRICAL
总用电 Total Power Required |
19kw |
电力要求
Electrical Power |
380V 3phases 50HZ (电压不合时,用户自备变压器35KWA) Customer shall prepare the transformer(35KWA) if the power supplier is not fit. |
3.6 压缩空气泵COMPRESSED AIR PUMP
空气压缩机排气量 Max. Air Compressor Displacement |
0.36m³/min(立方/分钟)< 用户自备> 0.36m³/min < Equipped by user> |
* 所示最大技术值不能同时适用
The maximum technical values shown cannot be applied simultaneously
* 技术规格之变动将不再另行通知
Technical specifications are subject to change without notice
- 设备结构与说明STANDARD EQUIPMENT
飞达/送纸部 FEEDER |
– 进口专利螺旋吹气分纸压脚; – Patent turbo spiral air blower pressing foot at feeder head – 采用四吸四送强力飞达,送纸稳定顺畅,同时吸嘴之高度与角度可相应调节; Four pick up and four forward suck heads with angle adjustment – 开闭式预备台车,提高操作之效率;(标配) Preloading device with rail cart and scaled gate(standard) – 倾斜式送纸台面,更加适合于高速薄纸的输送及定位; Inclined paper feeding table is more suitable for high-speed thin paper conveying and positioning; – 不停式运纸升降台装置; Non – stop feeder with automatic pile lift – 双张检测装置; Electrical double sheet control – 侧定位采用拉、推两用侧规装置,依照纸质选用,切换简便; Side lays on both sides push and pull convertible – 吹\吸气两用优质真空泵; High quality vacuum pump with both blowing and suction functions – 可切换前挡到位前降速装置,有利于高速薄纸之定位; Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays – 输纸毛轮胶轮可连动调整,提高效率; Feeding brush rollers and rubber rollers can be adjusted as a whole, thus improve efficiency |
模切部 DIE-CUTTING SECTION |
– 涡轮曲柄带动肘杆式高精度平面模切下工作台; Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement – 固定式高精密度平面模切上工作台; Precision stationery upper platen – 心脏部位的主要机件(曲轴、蜗杆、蜗轮、肘杆轴)均采用进口高级合金钢材; The main parts(crankshaft, worm shaft, worm gear, knukle shaft) are made of imported high-grade alloy steel – 模切钢板精准耐用,且采用靠齐一边的锁定; Sandwich hardened cutting plate – 模切部版框气动锁紧系统; – Pneumatic push button die-chase locking mechanism to ensure safe and operator friendly changing of the die – 大力矩气动离合/刹车器; Pneumatic clutch/brake for main drive system – 升退压力采用电动数显;(标配) Digital diecutting pressure tonnage display (standard) – 前规定位翻板可四点单独微调以适应不同纸张条件下的精准定位; The four front lays can be micro adjusted independently to adapt to the precise positioning under different paper conditions – 采用先进技术,单根牙排定位可做前后微调补偿,达到产品加工精度要求; Using advanced technology, each gripper bar can be micro adjusted to meet high accuracy – 最新科技多片式平行凸轮间歇链排传动机构; State – of – art 3 cam index gripper bar driving system to ensure smooth and precise gripper bar intermittent movement – 高精密度进口叼纸牙排传动链; High quality pre – stretched gripper bar driving chain – 5条进口叼纸牙排,每条10个精钢叼纸牙片及配套牙枕; Five high precision alloy gripper bar with 10 gripper bite each – 进纸口及出纸口,纸张到位检测电眼; Electric sensors to detect paper inlet, outlet and paper in place – 工作全程电眼监测配合大容量人机界面液晶显示屏,提供详细故障排除方法; The whole working process is monitored by electric sensors, and the detailed troubleshooting is provided on LCD screen – 心脏部件强制润滑系统油量采用0.75KW冷却循环装置,油压显示装置及油压、气压不足报警装置; The compulsory lubrication system on main parts adopts 0.75KW cooling circulation device, oil pressure display device and insufficient oil pressure and air pressure alarm device |
高堆收纸部 DELIVERY SECTION |
– 全自动主副收纸台,操作方便、大大提高生产效率,且副收纸台采用帘布式上下切换,大大方便操作更加适合小尺寸多拼版产品;
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange – 牙排传动链涨紧轮缓冲装置; Buffer device of tension wheel on gripper chain – 使用分段可调毛刷及纸张展平吹气装置来稳定收纸部之成品; Sectional brush brake and air blower to press down the sheets – PLC控制油泵自动主链条润滑装置; PLC control oil pump automatic main chain lubrication device |
电气控制ELECTRIC CONTROL | – 可编程控制器PLC控制整机的运行及故障监控系统;
PLC controls the operation of the whole machine and self-diagnostic system with indication on a LCD screen |
机器颜色
Machine Color |
– 浅灰和白色双色; Light gray and white |
5.制造地点Place of Manufacture
中国上海 shanghai china
Die cutting machine
Die cutting machine
Die cutting machine
Link:
https://maybaobivugia.com/san-pham/may-be-giay-tu-dong-eterna-ecut-1050e/